Vacuum Jigs
.png)
Quick-Off Vacuum Jig-Bench Mount
Quick-Off Vacuum Jig-Vise/Bench Mount
in stock Order#120-B
Benefits :
1.) Easily & Quickly remove your moldings, with only 3 fingers of force to loosen
2.) No need to tape around pipe & glue foam collars
3.) Never need to cut any moldings off including Duraflex and LDPE
4.) Retains heat for a better seal and vacuum
5.) Sliding T-handle never to get in the way of your moldings & has easy high leverage clamping
6.) Coated to prevent rust, easy cleaning, and anti-wear, with a surface hardness of about 56 HRC
7.) Clamp round tubing 1/8” - 7/8”, flat-bar up to 1” wide, square tubing and angle iron up to 3/4”
8.) Comes with 2-3/4” long, grade 8 hex bolts
9.) 1 year warranty on cone, 10 year warranty on vacuum jig
10.) Tested on: Duraflex, Polyethylene, Co-Polymer, Polypropolene, Pet-G, should be good for other plastics
11.) Guaranteed to be the most efficient way to do your moldings and limits re-molds
due to bad vacuum
1.) Easily & Quickly remove your moldings, with only 3 fingers of force to loosen
2.) No need to tape around pipe & glue foam collars
3.) Never need to cut any moldings off including Duraflex and LDPE
4.) Retains heat for a better seal and vacuum
5.) Sliding T-handle never to get in the way of your moldings & has easy high leverage clamping
6.) Coated to prevent rust, easy cleaning, and anti-wear, with a surface hardness of about 56 HRC
7.) Clamp round tubing 1/8” - 7/8”, flat-bar up to 1” wide, square tubing and angle iron up to 3/4”
8.) Comes with 2-3/4” long, grade 8 hex bolts
9.) 1 year warranty on cone, 10 year warranty on vacuum jig
10.) Tested on: Duraflex, Polyethylene, Co-Polymer, Polypropolene, Pet-G, should be good for other plastics
11.) Guaranteed to be the most efficient way to do your moldings and limits re-molds
due to bad vacuum
Benefits : ( same as indicated above with the adddition : )
1.) Perfectly Fits vise jaws of any size, just use longer screws through the vise clamp plate, (or just bench mount)
2.) Set a secure angle in the vise by adding a secondary plate and screwing 2 back screws over the vise jaws
3.) Allows pipe to rotate be moved or removed
4.) Contains rubber hoses at handle and nut to limit minor leak from threads, 1/2" NPT ball valve, 1.5" glycerin filled vacuum gauge, 1/2" to 1/1/4" NPT Reducer, 1/4" NPT air fitting, and other fasteners
1.) Perfectly Fits vise jaws of any size, just use longer screws through the vise clamp plate, (or just bench mount)
2.) Set a secure angle in the vise by adding a secondary plate and screwing 2 back screws over the vise jaws
3.) Allows pipe to rotate be moved or removed
4.) Contains rubber hoses at handle and nut to limit minor leak from threads, 1/2" NPT ball valve, 1.5" glycerin filled vacuum gauge, 1/2" to 1/1/4" NPT Reducer, 1/4" NPT air fitting, and other fasteners
Quick-Off Vacuum Jig-Bench Mount
in stock Order#120-W
Vacuum Jigs
Benefits :
1.) Easily & Quickly remove your moldings, with only 3 fingers of force to loosen
2.) No need to tape around pipe & glue foam collars
3.) Never need to cut any moldings off including Duraflex and LDPE
4.) Retains heat for a better seal and vacuum
5.) Sliding T-handle never to get in the way of your moldings & has easy high leverage clamping
6.) Coated to prevent rust, easy cleaning, and anti-wear, with a surface hardness of about 56 HRC
7.) Clamp round tubing 1/8” - 7/8”, flat-bar up to 1” wide, square tubing and angle iron up to 3/4”
8.) Comes with 2-3/4” long, grade 8 hex bolts
9.) 1 year warranty on cone, 10 year warranty on vacuum jig
10.) Tested on: Duraflex, Polyethylene, Co-Polymer, Polypropolene, Pet-G, should be good for other plastics
11.) Guaranteed to be the most efficient way to do your moldings and limits re-molds
due to bad vacuum
1.) Easily & Quickly remove your moldings, with only 3 fingers of force to loosen
2.) No need to tape around pipe & glue foam collars
3.) Never need to cut any moldings off including Duraflex and LDPE
4.) Retains heat for a better seal and vacuum
5.) Sliding T-handle never to get in the way of your moldings & has easy high leverage clamping
6.) Coated to prevent rust, easy cleaning, and anti-wear, with a surface hardness of about 56 HRC
7.) Clamp round tubing 1/8” - 7/8”, flat-bar up to 1” wide, square tubing and angle iron up to 3/4”
8.) Comes with 2-3/4” long, grade 8 hex bolts
9.) 1 year warranty on cone, 10 year warranty on vacuum jig
10.) Tested on: Duraflex, Polyethylene, Co-Polymer, Polypropolene, Pet-G, should be good for other plastics
11.) Guaranteed to be the most efficient way to do your moldings and limits re-molds
due to bad vacuum
Benefits :
(same as indicated above plus) :
1.) Perfectly Fits vise jaws of any size, just use longer screws through the vise clamp plate
2.) Set a secure angle in the vise by adding a secondary plate and screwing 2 back screws over the vise jaws
3.) Allows pipe to be moved or removed
(same as indicated above plus) :
1.) Perfectly Fits vise jaws of any size, just use longer screws through the vise clamp plate
2.) Set a secure angle in the vise by adding a secondary plate and screwing 2 back screws over the vise jaws
3.) Allows pipe to be moved or removed
Vacuum Cone (Black)
in stock Order # 120-B
Vacuum Cone (White)
in stock Order # 120-W
Purchase for your existing vacuum forming jigs to help make vacuum forming more efficient
To be used on round tubing with a 1-5/8” (1.625”) / (41.275 mm) outside diameter
1-1/4" Pipe from the local hardware store is usually 1.660” O.D. so it will need to be sanded down just a little bit to fit and attaches with 4, 8-32 screws.
To be used on round tubing with a 1-5/8” (1.625”) / (41.275 mm) outside diameter
1-1/4" Pipe from the local hardware store is usually 1.660” O.D. so it will need to be sanded down just a little bit to fit and attaches with 4, 8-32 screws.
Free World Wide Shipping Add-On-Item
Free World Wide Shipping Add-On-Item
