New Upcoming Products
Multi-Purpose Rivet Die Punch
Benefits :
1.) Convert all your 1/4" post dies inot various punches, which saves the cost of buying many individual punches, along with ones not even available.
( For 3/16” post dies refer to Order # 164 )
If your dies have a retainer spring they won't fall out, if not just tighten the screw, and the top screw also acts as a stop to prevent the punch from rolling.
2.) Use it as a Rivet Die Extension Rod, with the supplied adapter and place it in a 3/16" or 1/4" hole depending on the model.
3.) Rivet Setter ; fits copper belt rivets size # 5, # 6 ( for sizes : # 7, # 8, # 9, # 10, refer to Order # 164 )
Since the hole goes all the way through it makes this punch lighter and there is no need to cut your rivets shorter when punching on burrs.
4.) This is a solid punch 5/8" diameter, 5-1/2" long that has been precision machined out of tool steel, fully hardened and coated to prevent rust.
1.) Convert all your 1/4" post dies inot various punches, which saves the cost of buying many individual punches, along with ones not even available.
( For 3/16” post dies refer to Order # 164 )
If your dies have a retainer spring they won't fall out, if not just tighten the screw, and the top screw also acts as a stop to prevent the punch from rolling.
2.) Use it as a Rivet Die Extension Rod, with the supplied adapter and place it in a 3/16" or 1/4" hole depending on the model.
3.) Rivet Setter ; fits copper belt rivets size # 5, # 6 ( for sizes : # 7, # 8, # 9, # 10, refer to Order # 164 )
Since the hole goes all the way through it makes this punch lighter and there is no need to cut your rivets shorter when punching on burrs.
4.) This is a solid punch 5/8" diameter, 5-1/2" long that has been precision machined out of tool steel, fully hardened and coated to prevent rust.
New Products
Order # 165 ( For 1/4" Post Dies )
Order # 164 ( For 3/16" Post Dies )
Heavy-Duty M-L / A-P Bending Iron T-3
Benefits :
1.) 13" length to allow bends with less force for 3/16" and 1/4" thick uprights
2.) Close Anterior Posterior bends for up to 3/16" thick aluminum and certain stainless steel
3.) Reinforced bottom rad compared to T-2 model, and 4 year warranty
4.) Ground rads to limit marks on metal
5.) Nickel and Chrome coated for a superior finish
6.) Made from fully hardened tool steel, and made to last a lifetime
1.) 13" length to allow bends with less force for 3/16" and 1/4" thick uprights
2.) Close Anterior Posterior bends for up to 3/16" thick aluminum and certain stainless steel
3.) Reinforced bottom rad compared to T-2 model, and 4 year warranty
4.) Ground rads to limit marks on metal
5.) Nickel and Chrome coated for a superior finish
6.) Made from fully hardened tool steel, and made to last a lifetime
Order # 161
Aluminum Quick-Off Vacuum Cone
Description :
Our newest design made of aluminum instead of plastic for durability, can also be used for laminating jigs. The hole size was increased so it can fit your current molding or laminating jig without the need of any grinding and attaches with 4 screws, just drill / tap 4, 8-32 holes in the pipe, then apply the supplied high heat silicone around the back for a seal. (Made to fit 1-5/8" OD Tube and 1-1/4" Pipe)
Benefits :
1.) No need to wrap electrical tape or foam collars around pipe
2.) No need to cut moldings off the vacuum jig for plastics as LDPE, Duraflex, and similar
3.) Loosen moldings from the vacuum jig with just 3 fingers of force, even next day just twist off with one hand
Laminating Benefits :
1.) Due to the tapered design easily remove laminations off the jig without the need to ever cut it, which will save time, pay for itself, plus limit excess fumes
Our newest design made of aluminum instead of plastic for durability, can also be used for laminating jigs. The hole size was increased so it can fit your current molding or laminating jig without the need of any grinding and attaches with 4 screws, just drill / tap 4, 8-32 holes in the pipe, then apply the supplied high heat silicone around the back for a seal. (Made to fit 1-5/8" OD Tube and 1-1/4" Pipe)
Benefits :
1.) No need to wrap electrical tape or foam collars around pipe
2.) No need to cut moldings off the vacuum jig for plastics as LDPE, Duraflex, and similar
3.) Loosen moldings from the vacuum jig with just 3 fingers of force, even next day just twist off with one hand
Laminating Benefits :
1.) Due to the tapered design easily remove laminations off the jig without the need to ever cut it, which will save time, pay for itself, plus limit excess fumes
Adjustable Safety Locking A-P Bar
Description :
The Adjustable Safety Locking A-P Bar, is similar as the previous model, with the addition of 2 extra dies, larger handle grip, and a dual coating
Benefits :
1.) 34" length for bending 1/2", 5/8", 3/4", ( 13mm, 16mm, 19mm, 20mm ) wide metal uprights with less force
2.) Bend with better control due to a 4 point contact during the bend
3.) Bend with safety without a chance of the upright slipping out due to a safety latch and clamp screw
4.) Bend with comfort due to a PVC, nylon braided reinforced handle grip to minimize pressure on the hands
5.) Nickel and Chrome coated for a superior finish
6.) Entire device has been hardened, has a 3 year warranty, but was made to last a lifetime
The Adjustable Safety Locking A-P Bar, is similar as the previous model, with the addition of 2 extra dies, larger handle grip, and a dual coating
Benefits :
1.) 34" length for bending 1/2", 5/8", 3/4", ( 13mm, 16mm, 19mm, 20mm ) wide metal uprights with less force
2.) Bend with better control due to a 4 point contact during the bend
3.) Bend with safety without a chance of the upright slipping out due to a safety latch and clamp screw
4.) Bend with comfort due to a PVC, nylon braided reinforced handle grip to minimize pressure on the hands
5.) Nickel and Chrome coated for a superior finish
6.) Entire device has been hardened, has a 3 year warranty, but was made to last a lifetime
Order # 163
Finished Color will be a silver/grey as the image beside
Order # 166
Flush Edge Speedy Rivet Die
Benefits :
1.) The edges on the bottom speedy rivet are closer to the material, creating a nice convex shape, to minimize the usual exposed edge during riveting.
2.) Retainer clip to automaticallly lock itself inside the hole to prevent falling out
3.) Made from fully hardened tool steel
4.) Coated to minimize rust
5.) Custom made for 89x, 91x speedy rivets and similar sizes, thickness of materials rivet together should be a min. of 1/8"
1.) The edges on the bottom speedy rivet are closer to the material, creating a nice convex shape, to minimize the usual exposed edge during riveting.
2.) Retainer clip to automaticallly lock itself inside the hole to prevent falling out
3.) Made from fully hardened tool steel
4.) Coated to minimize rust
5.) Custom made for 89x, 91x speedy rivets and similar sizes, thickness of materials rivet together should be a min. of 1/8"
Flush Edge
Speedy Rivet Die
Speedy Rivet Die
Safety Locking A-P Bar
Aluminum
Quick-Off Vacuum Cone
Quick-Off Vacuum Cone
Finished Color will be a silver/grey as the image below
Heavy-Duty M-L / A-P
Bending Iron T-3
Bending Iron T-3
Multi-Purpose
Rivet Die Punch
Rivet Die Punch
Dies Sold Seperately
A minimum order is required for production, if interested in any of these products, please let us know to determine sufficient production.
For pricing or questions send us a email at info@kovacicorthopedic.com or give us a call at 1.800.665.1176
For pricing or questions send us a email at info@kovacicorthopedic.com or give us a call at 1.800.665.1176
Order # 167
Free World Wide Shipping Add-On-Item
Free World Wide Shipping Add-On-Item
Free World Wide Shipping Add-On-Items
Free World Wide Shipping Add-On-Item
