4-Pc Ball Die Set
12-Pc Rivet Die Set
in stock Order # 47
in stock Order # 48
1.25" x 27" Riveting Bar
out of stock Order # 18
.JPG)
Riveting Tools
 - 20Copy.JPG)
1.25" x 27" Riveting Bar
in stock Order # 148
1.25" x 27" Riveting Bar
in stock Order # 147
1.25" x 27" Rotating Riveting Bar
in stock Order # 20
Benefits :
1.) Allows riveting with 2 people at once, and a 3d person with the use of the rivet die extension rod.
2.) Long safety channels to fit vise jaws up to 1” wide, to prevent excess tilting and in / out adjustability
3.) Front cut out, making it easier to slide over pediatric devices for riveting.
4.) Set screws to prevent rivet dies from falling out after riveting, due to the occasional speedy rivet getting stuck on the die
5.) Copper belt rivet dommers in front of the bar for sizes # 10 and # 7.
6.) Rivet punch / drill out hole in the front of the bar for knocking or drilling out rivets.
7.) 5/8” horizontal cross hole to fit an adjustable rivet die extension rod, with the use of a die
for riveting in hard to reach areas, and using a ball die for small AFO flares and easing out plastic.
8.) 5/8” Vertical hole for a rivet die extension rod that can be set at various heights to allow riveting in deep footwear or other hard to reach areas.
9.) The entire bar has been hardened to limit wear and dents to help keep its appearance over time, nickel coated to prevent rust,
easy cleaning, and comes with a 10 year limited warranty but it was made to last a lifetime.
10.) Additionally The Rotating Riveting Bar : allows it to be clamped to vise jaws of any thickness, by inserting longer screws.
11.) The "Rivet Die Extension Rod" (seperate optional accessory) will never get in the way of the vise.
12.) Rotates 360 and can be locked in place by tightening the the top screw, after by hand, turning the bar.
( unlimited body pushing force can be applied in the "Tightening CW (Clock-Wise )" direction, but Not in the "Loosening CCW (Counter Clock-Wise) ).
1.) Allows riveting with 2 people at once, and a 3d person with the use of the rivet die extension rod.
2.) Long safety channels to fit vise jaws up to 1” wide, to prevent excess tilting and in / out adjustability
3.) Front cut out, making it easier to slide over pediatric devices for riveting.
4.) Set screws to prevent rivet dies from falling out after riveting, due to the occasional speedy rivet getting stuck on the die
5.) Copper belt rivet dommers in front of the bar for sizes # 10 and # 7.
6.) Rivet punch / drill out hole in the front of the bar for knocking or drilling out rivets.
7.) 5/8” horizontal cross hole to fit an adjustable rivet die extension rod, with the use of a die
for riveting in hard to reach areas, and using a ball die for small AFO flares and easing out plastic.
8.) 5/8” Vertical hole for a rivet die extension rod that can be set at various heights to allow riveting in deep footwear or other hard to reach areas.
9.) The entire bar has been hardened to limit wear and dents to help keep its appearance over time, nickel coated to prevent rust,
easy cleaning, and comes with a 10 year limited warranty but it was made to last a lifetime.
10.) Additionally The Rotating Riveting Bar : allows it to be clamped to vise jaws of any thickness, by inserting longer screws.
11.) The "Rivet Die Extension Rod" (seperate optional accessory) will never get in the way of the vise.
12.) Rotates 360 and can be locked in place by tightening the the top screw, after by hand, turning the bar.
( unlimited body pushing force can be applied in the "Tightening CW (Clock-Wise )" direction, but Not in the "Loosening CCW (Counter Clock-Wise) ).
Sizes: 1", 1.25", 1.375", 1.50"
Description :
1.) Mini rivet die 1/4" High for speedy rivet dies size 00 and similar
2.) Custom made speedy rivet dies 1/4", 3/8", 3/4" Heights for 89x / 91x & similar sized speedy rivets. Aligns rivets and prevents them from sliding off even when a brace is partially tilted, guaranteed to be the best or a refund will be issued
3.) 5/8" diameter flat rivet dies 1/4", 3/8", 5/8", 3/4" Heights
4.) 3/4" diameter flat rivet dies 1/4", 5/8" Heights
5.) # 10 Copper belt rivet dommers 3/4", 1" Heights
6.) All dies are made from fully hardened tool steel, will not deform, 10 year warranty but were made to last a lifetime
1.) Mini rivet die 1/4" High for speedy rivet dies size 00 and similar
2.) Custom made speedy rivet dies 1/4", 3/8", 3/4" Heights for 89x / 91x & similar sized speedy rivets. Aligns rivets and prevents them from sliding off even when a brace is partially tilted, guaranteed to be the best or a refund will be issued
3.) 5/8" diameter flat rivet dies 1/4", 3/8", 5/8", 3/4" Heights
4.) 3/4" diameter flat rivet dies 1/4", 5/8" Heights
5.) # 10 Copper belt rivet dommers 3/4", 1" Heights
6.) All dies are made from fully hardened tool steel, will not deform, 10 year warranty but were made to last a lifetime
Description :
1.) These Ball Dies fit all of our rivet bars, rivet die extension rods, and other rivet bars containing a 1/4” hole.
2.) Can be used for riveting in contoured areas as, sockets, helmets, and certain areas of an AFO.
3.) Great for easing out plastic and doing small flares.
4.) Made from fully hardened tool steel, 10 year warranty but were made to last a lifetime.
1.) These Ball Dies fit all of our rivet bars, rivet die extension rods, and other rivet bars containing a 1/4” hole.
2.) Can be used for riveting in contoured areas as, sockets, helmets, and certain areas of an AFO.
3.) Great for easing out plastic and doing small flares.
4.) Made from fully hardened tool steel, 10 year warranty but were made to last a lifetime.
Rivet Die Extension Rod
in stock Order # 116
Description :
1.) 12” length and is made to go through all of our rivet bars and can be set at adjustable heights by placing a dowel pin through the cross holes,
or it can be used on its own inside a vise to access hard to reach areas, as footwear, sockets, ect...
2.) Contains 1/4” holes on each end for placing in any of our rivet dies and ball dies and any other dies with a 1/4” post., plus 2 set screws for securing the dies.
3.) One of the 1/4” holes is also threaded for 5/16-NC incase you need to join multiple rods together, or other attachments that might suit your needs.
4.) Made from 316 Stainless Steel but got ruined esthetically during a hardening process but it is functional, it just does not look nice.
Available Individually
Available Individually
Benefits :
1.) Allows riveting with 2 people at once, and a 3d person with the use of the rivet die extension rod.
2.) Long safety channels to fit vise jaws up to 1” wide, to prevent excess tilting and in-out adjustability
3.) Front cut out, making it easier to slide over pediatric devices for riveting.
4.) Set screws to prevent rivet dies from falling out after riveting, due to the occasional speedy rivet getting stuck on the die
5.) Copper belt rivet dommers in front of the bar for sizes # 10 and # 7.
6.) Rivet punch / drill out hole in the front of the bar for knocking or drilling out rivets.
7.) 5/8” horizontal cross hole to fit an adjustable rivet die extension rod, with the use of a die
for riveting in hard to reach areas, and using a ball die for small AFO flares and easing out plastic.
8.) 5/8” Vertical hole for a rivet die extension rod that can be set at various heights to allow riveting
in deep footwear or other hard to reach areas.
9.) The entire bar has been hardened to limit wear and dents to help keep its appearance over time, nickel coated to prevent rust, easy cleaning, and comes with a 10 year limited warranty but it was made to last a lifetime.
10.) Additionally The Rotating Riveting Bar : allows it to be clamped to vise jaws of any thickness,
by inserting longer screws.
11.) The "Rivet Die Extension Rod" (seperate optional accessory) will never get in the way of the vise
12.) Rotates 360 and can be locked in place by tightening the the top screw, after by hand,
by turning the bar.
( unlimited body pushing force can be applied in the "Tightening CCW (Counter-Clock-Wise )" direction, but Not in the "Loosening CW (Clock-Wise) ).
1.) Allows riveting with 2 people at once, and a 3d person with the use of the rivet die extension rod.
2.) Long safety channels to fit vise jaws up to 1” wide, to prevent excess tilting and in-out adjustability
3.) Front cut out, making it easier to slide over pediatric devices for riveting.
4.) Set screws to prevent rivet dies from falling out after riveting, due to the occasional speedy rivet getting stuck on the die
5.) Copper belt rivet dommers in front of the bar for sizes # 10 and # 7.
6.) Rivet punch / drill out hole in the front of the bar for knocking or drilling out rivets.
7.) 5/8” horizontal cross hole to fit an adjustable rivet die extension rod, with the use of a die
for riveting in hard to reach areas, and using a ball die for small AFO flares and easing out plastic.
8.) 5/8” Vertical hole for a rivet die extension rod that can be set at various heights to allow riveting
in deep footwear or other hard to reach areas.
9.) The entire bar has been hardened to limit wear and dents to help keep its appearance over time, nickel coated to prevent rust, easy cleaning, and comes with a 10 year limited warranty but it was made to last a lifetime.
10.) Additionally The Rotating Riveting Bar : allows it to be clamped to vise jaws of any thickness,
by inserting longer screws.
11.) The "Rivet Die Extension Rod" (seperate optional accessory) will never get in the way of the vise
12.) Rotates 360 and can be locked in place by tightening the the top screw, after by hand,
by turning the bar.
( unlimited body pushing force can be applied in the "Tightening CCW (Counter-Clock-Wise )" direction, but Not in the "Loosening CW (Clock-Wise) ).
Riveting Tools
Benefits :
1.) Allows riveting with 2 people at once, and a 3d person with the use of the rivet die extension rod.
2.) Long safety channels to fit vise jaws up to 1” wide, to prevent excess tilting and
in-out adjustability
3.) Front cut out, making it easier to slide over pediatric devices for riveting.
4.) Set screws to prevent rivet dies from falling out after riveting, due to the occasional speedy rivet getting stuck on the die
5.) Copper belt rivet dommers in front of the bar for sizes # 10 and # 7.
6.) Rivet punch / drill out hole in the front of the bar for knocking or drilling out rivets.
7.) 5/8” horizontal cross hole to fit an adjustable rivet die extension rod, with the use of a die
for riveting in hard to reach areas, and using a ball die for small AFO flares and easing out plastic.
8.) 5/8” Vertical hole for a rivet die extension rod that can be set at various heights to allow riveting
in deep footwear or other hard to reach areas.
9.) The entire bar has been hardened to limit wear and dents to help keep its appearance over time, nickel coated to prevent rust, easy cleaning, and comes with a 10 year limited warranty but it was made to last a lifetime.
10.) Additionally The Rotating Riveting Bar : allows it to be clamped to vise jaws of any thickness,
by inserting longer screws.
11.) The "Rivet Die Extension Rod" (seperate optional accessory) will never get in the way of the vise.
12.) Rotates 360 and can be locked in place by tightening the the top screw, after by hand,
by turning the bar.
( unlimited body pushing force can be applied in the "Tightening CCW (Counter-Clock-Wise )" direction, but Not in the "Loosening CW (Clock-Wise) ).
1.) Allows riveting with 2 people at once, and a 3d person with the use of the rivet die extension rod.
2.) Long safety channels to fit vise jaws up to 1” wide, to prevent excess tilting and
in-out adjustability
3.) Front cut out, making it easier to slide over pediatric devices for riveting.
4.) Set screws to prevent rivet dies from falling out after riveting, due to the occasional speedy rivet getting stuck on the die
5.) Copper belt rivet dommers in front of the bar for sizes # 10 and # 7.
6.) Rivet punch / drill out hole in the front of the bar for knocking or drilling out rivets.
7.) 5/8” horizontal cross hole to fit an adjustable rivet die extension rod, with the use of a die
for riveting in hard to reach areas, and using a ball die for small AFO flares and easing out plastic.
8.) 5/8” Vertical hole for a rivet die extension rod that can be set at various heights to allow riveting
in deep footwear or other hard to reach areas.
9.) The entire bar has been hardened to limit wear and dents to help keep its appearance over time, nickel coated to prevent rust, easy cleaning, and comes with a 10 year limited warranty but it was made to last a lifetime.
10.) Additionally The Rotating Riveting Bar : allows it to be clamped to vise jaws of any thickness,
by inserting longer screws.
11.) The "Rivet Die Extension Rod" (seperate optional accessory) will never get in the way of the vise.
12.) Rotates 360 and can be locked in place by tightening the the top screw, after by hand,
by turning the bar.
( unlimited body pushing force can be applied in the "Tightening CCW (Counter-Clock-Wise )" direction, but Not in the "Loosening CW (Clock-Wise) ).
Description :
1.) Mini rivet die 1/4" High for speedy rivet dies size 00 and similar
2.) Custom made speedy rivet dies 1/4", 3/8", 3/4" Heights for 89x / 91x & similar sized speedy rivets. Aligns rivets and prevents them from sliding off even when a brace is partially tilted, guaranteed to be the best or a refund will be issued
3.) 5/8" diameter flat rivet dies 1/4", 3/8", 5/8", 3/4" Heights
4.) 3/4" diameter flat rivet dies 1/4", 5/8" Heights
5.) # 10 Copper belt rivet dommers 3/4", 1" Heights
6.) All dies are made from fully hardened tool steel, will not deform, 10 year warranty but were made to last a lifetime
1.) Mini rivet die 1/4" High for speedy rivet dies size 00 and similar
2.) Custom made speedy rivet dies 1/4", 3/8", 3/4" Heights for 89x / 91x & similar sized speedy rivets. Aligns rivets and prevents them from sliding off even when a brace is partially tilted, guaranteed to be the best or a refund will be issued
3.) 5/8" diameter flat rivet dies 1/4", 3/8", 5/8", 3/4" Heights
4.) 3/4" diameter flat rivet dies 1/4", 5/8" Heights
5.) # 10 Copper belt rivet dommers 3/4", 1" Heights
6.) All dies are made from fully hardened tool steel, will not deform, 10 year warranty but were made to last a lifetime
Description :
1.) These Ball Dies fit all of our rivet bars, rivet die extension rods, and other rivet bars containing a 1/4” hole.
2.) Can be used for riveting in contoured areas as, sockets, helmets, and certain areas of an AFO.
3.) Great for easing out plastic and doing small flares.
4.) Made from fully hardened tool steel, 10 year warranty but were made to last a lifetime.
1.) These Ball Dies fit all of our rivet bars, rivet die extension rods, and other rivet bars containing a 1/4” hole.
2.) Can be used for riveting in contoured areas as, sockets, helmets, and certain areas of an AFO.
3.) Great for easing out plastic and doing small flares.
4.) Made from fully hardened tool steel, 10 year warranty but were made to last a lifetime.
Description :
1.) 12” length and is made to go through all of our rivet bars and can be set at adjustable heights by placing a dowel pin through the cross holes, or it can be used on its own inside a vise to access hard to reach areas, as footwear, sockets, ect...
2.) Contains 1/4” holes on each end for placing in any of our rivet dies and ball dies and any other dies with a 1/4” post., plus 2 set screws for securing the dies.
3.) One of the 1/4” holes is also threaded for 5/16-NC incase you need to join multiple rods together, or other attachments that might suit your needs.
4.) Made from 316 Stainless Steel but got ruined esthetically during a hardening process but it is functional, it just does not look nice.
Free World Wide Shipping Add-On-Item
Free World Wide Shipping Add-On-Item
Free World Wide Shipping Add-On-Item
