Mechanical Grease Pencils
out of stock Order # 95
Pink Rubber Plaster Mixing Bowl
out of stock Order # 98
3-Pc Gauge Set
Drill Press Drill Out Jig
Benefits :
1.) Thicker wall so it isn't as flimsy
2.) Base is a little wider to limit tipping over
3.) Measuring lines inside the bowl
1.) Thicker wall so it isn't as flimsy
2.) Base is a little wider to limit tipping over
3.) Measuring lines inside the bowl
Benefits :
1.) Can be bolted or clamped on a drill press table or vise and extended to allow drilling out KAFO rivets for better control without interference
2.) Removable 1/2” mandrel for drilling out shoe caliper plates, and other devices where the standard drill press table is not suitable
3.) Can screw together other pipe fittings locally available for a preferred use
4.) 5 year warranty, coated to prevent rust, but it should last a lifetime
1.) Can be bolted or clamped on a drill press table or vise and extended to allow drilling out KAFO rivets for better control without interference
2.) Removable 1/2” mandrel for drilling out shoe caliper plates, and other devices where the standard drill press table is not suitable
3.) Can screw together other pipe fittings locally available for a preferred use
4.) 5 year warranty, coated to prevent rust, but it should last a lifetime
Benefits :
1.) The most durable & reliable grease pencils by Listo
2.) No more peeling
3.) The leads almost never break even when dropped
4.) Basic screw type mechanism to push out the lead
5.) Available in 7 colors
6.) 72 refill leads per box, being very cost effective
1.) The most durable & reliable grease pencils by Listo
2.) No more peeling
3.) The leads almost never break even when dropped
4.) Basic screw type mechanism to push out the lead
5.) Available in 7 colors
6.) 72 refill leads per box, being very cost effective
Blind Rivet Gauge ( Red )
Organize your blind rivets easily or use the gauge to determine plastic thickness sizes :
3/32”, 1/8”, 5/32”, 3/16”, 1/4”, and use it to measure items up to 5-1/4”
Screw Gauge [Imperial / Metric ] ( White )
Organize your coarse & fine threaded screws number 0-12, & 1/4”, 5,16”, 3/8”, 1/2”, 5/8”, 3/4”
Metric: M-1.6, M-2, M-2.5, M-3, M-4, M-5, M-6, M-8, M-10, M-12, M-14, M-16
Flip the gauge over and use it as a drill and tap gauge with the ability to screw blots/screws from both sides
Drill Gauge ( Blue )
The drill gauge is different then most, for example a 1/2” hole is 1/2”, it does not have the
clearance for a loose fit which makes it great to figure out exact rod thickness
Drill bits are checked from the shank instead of the tip which may cause it to get stuck
Contains 32 holes from size 1/16” - 3/4”, that are clearly visible and includes measurements in millimeter equivalence, plus can be used to measure items up to 7.5” / 190mm
Organize your blind rivets easily or use the gauge to determine plastic thickness sizes :
3/32”, 1/8”, 5/32”, 3/16”, 1/4”, and use it to measure items up to 5-1/4”
Screw Gauge [Imperial / Metric ] ( White )
Organize your coarse & fine threaded screws number 0-12, & 1/4”, 5,16”, 3/8”, 1/2”, 5/8”, 3/4”
Metric: M-1.6, M-2, M-2.5, M-3, M-4, M-5, M-6, M-8, M-10, M-12, M-14, M-16
Flip the gauge over and use it as a drill and tap gauge with the ability to screw blots/screws from both sides
Drill Gauge ( Blue )
The drill gauge is different then most, for example a 1/2” hole is 1/2”, it does not have the
clearance for a loose fit which makes it great to figure out exact rod thickness
Drill bits are checked from the shank instead of the tip which may cause it to get stuck
Contains 32 holes from size 1/16” - 3/4”, that are clearly visible and includes measurements in millimeter equivalence, plus can be used to measure items up to 7.5” / 190mm
in stock Order # 49
Order # 67
Black-Box of 12
Order # 68
Brown-Box of 12
Order # 69
White-Box of 12
Order # 70
Red-Box of 12
Order # 71
Blue-Box of 12
Order # 73
Green-Box of 12
Order # 72
Yellow-Box of 12
Order # 74
Black-Box of 72
Order # 75
Brown-Box of 72
Order # 76
White-Box of 72
Order # 77
Red-Box of 72
Order # 78
Blue-Box of 72
Order # 80
Green-Box of 72
Order # 79
Yellow-Box of 72
Drill Press Drill Out Jig
Mechanical Grease Pencils
Benefits :
1.) The most durable & reliable grease pencils by Listo
2.) No more peeling
3.) The leads almost never break even when dropped
4.) Basic screw type mechanism to push out the lead
5.) Available in 7 colors
6.) 72 refill leads per box, being very cost effective
1.) The most durable & reliable grease pencils by Listo
2.) No more peeling
3.) The leads almost never break even when dropped
4.) Basic screw type mechanism to push out the lead
5.) Available in 7 colors
6.) 72 refill leads per box, being very cost effective
3-Pc Gauge Set
Blind Rivet Gauge ( Red )
Organize your blind rivets easily or use the gauge to determine plastic thickness sizes :
3/32”, 1/8”, 5/32”, 3/16”, 1/4”, and use it to measure items up to 5-1/4”
Screw Gauge [Imperial / Metric ] ( White )
Organize your coarse & fine threaded screws number 0-12, & 1/4”, 5,16”, 3/8”, 1/2”, 5/8”, 3/4”
Metric: M-1.6, M-2, M-2.5, M-3, M-4, M-5, M-6, M-8, M-10, M-12, M-14, M-16
Flip the gauge over and use it as a drill and tap gauge with the ability to screw blots/screws from both sides
Drill Gauge ( Blue )
The drill gauge is different then most, for example a 1/2” hole is 1/2”, it does not have the
clearance for a loose fit which makes it great to figure out exact rod thickness
Drill bits are checked from the shank instead of the tip which may cause it to get stuck
Contains 32 holes from size 1/16” - 3/4”, that are clearly visible and includes measurements in millimeter equivalence, plus can be used to measure items up to 7.5” / 190mm
Organize your blind rivets easily or use the gauge to determine plastic thickness sizes :
3/32”, 1/8”, 5/32”, 3/16”, 1/4”, and use it to measure items up to 5-1/4”
Screw Gauge [Imperial / Metric ] ( White )
Organize your coarse & fine threaded screws number 0-12, & 1/4”, 5,16”, 3/8”, 1/2”, 5/8”, 3/4”
Metric: M-1.6, M-2, M-2.5, M-3, M-4, M-5, M-6, M-8, M-10, M-12, M-14, M-16
Flip the gauge over and use it as a drill and tap gauge with the ability to screw blots/screws from both sides
Drill Gauge ( Blue )
The drill gauge is different then most, for example a 1/2” hole is 1/2”, it does not have the
clearance for a loose fit which makes it great to figure out exact rod thickness
Drill bits are checked from the shank instead of the tip which may cause it to get stuck
Contains 32 holes from size 1/16” - 3/4”, that are clearly visible and includes measurements in millimeter equivalence, plus can be used to measure items up to 7.5” / 190mm
Pink Rubber Plaster Mixing Bowl
Benefits :
1.) Thicker wall so it isn't as flimsy
2.) Base is a little wider to limit tipping over
3.) Measuring lines inside the bowl
1.) Thicker wall so it isn't as flimsy
2.) Base is a little wider to limit tipping over
3.) Measuring lines inside the bowl
Benefits :
1.) Can be bolted or clamped on a drill press table or vise and extended to allow drilling out KAFO rivets for better control without interference
2.) Removable 1/2” mandrel for drilling out shoe caliper plates, and other devices where the standard drill press table is not suitable
3.) Can screw together other pipe fittings locally available for a preferred use
4.) 5 year warranty, coated to prevent rust, but it should last a lifetime
1.) Can be bolted or clamped on a drill press table or vise and extended to allow drilling out KAFO rivets for better control without interference
2.) Removable 1/2” mandrel for drilling out shoe caliper plates, and other devices where the standard drill press table is not suitable
3.) Can screw together other pipe fittings locally available for a preferred use
4.) 5 year warranty, coated to prevent rust, but it should last a lifetime
out of stock Order # 95
Lucky Rabbit's Foot Left & Right Labels
Benefits :
1.) Help kids identify a Left & Right; Shoe, S.M.O. or A.F.O.
2.) Attach labels to give an esthetic appeal
3.) Just wear them for Good Luck !
1.) Help kids identify a Left & Right; Shoe, S.M.O. or A.F.O.
2.) Attach labels to give an esthetic appeal
3.) Just wear them for Good Luck !
in stock Order # 158 ( English )
contact Order # 955 (German)
contact Order # 955 (German)
250 Pair (500 individual)
Lucky Rabbit's Foot Left & Right Labels
in stock
in stock
Free World Wide Shipping Add-On-Item
Free World Wide Shipping Add-On-Item
Free World Wide Shipping Add-On-Items
Free World Wide Shipping Add-On-Item
Free World Wide Shipping Add-On-Items
Free World Wide Shipping Add-On-Item
Distribution Pricing Available, Please Contact for Details
